ADVANCED DIGITAL CONTROL II (ADC II and ADC IId)

ADC II: Marine Models 5/7.5/10EKD and 4/6/8EFKD

ADC IId: Diesel Marine Models 6EKOD/5EFKOD, 9EKOZD/7EFKOZD, and 11EKOZD/9EFKOZD

The ADC II firmware (application program) is factory loaded and used for field upgrades or replacements.

The controller includes a USB connection for updating software and configuring parameters.

ADC II for Models 5/7.5/10EKD and 4/6/8EFKD

Version 1.08.4
Update: Added support for 2” NMEA 2000 gauge.

Version 1.07.0
Update: Addresses diagnostic handling on the controller.

Version 1.5.0
Update: Addresses issue for fuel pump shutoff. Supports ECM software version in user interface.

Version 1.4.0
Not Released.

Version 1.3.0
Code Display Text: "Out of fuel" changed to "Check Engine".

Version 1.2.0
J1939 Remote Gauge: Corrected starting from J1939 gauge (Kit GM32337-KP1) after cycling battery power.

Version 1.1.0
System Voltage: Default changed to 120.

ADC IId (Diesel) for Models 6EKOD/5EFKOD, 9EKOZD/7EFKOZD, and 11EKOZD/9EFKOZD

Version 4.05.0 Release Date 5/11/2017
Update: Increase Low Oil Pressure inhibit delay 20 seconds for warnings and shutdowns on the standard and isolated oil pressure senders.

Version 4.04.0
Update: Added support for the 2” NMEA 2000 gauge.

Version 4.03.0
Update: Addresses the issue of upgrading the runtime information set to “-1”.

Version 3.12 Release date 12/18/2014
Update: Fixed issue with generator sets that use a isolated oil pressure sensor. The controller was reporting a false genset controller mismatch fault.

Version 3.09
Update: Added USB host support.