Advanced Digital Control (ADC)

Digital Control
(DC 2200)

ADC-RES

DC-RET

Generator Use

Marine, Mobile, Residential Generators

Exceptions as noted for GM46776, GM48030, GM47982, GM48031, GM42037, GM46826, GM39579, GM48127

Marine Only:
5/7.3ECD and 4/6EFCD

Marine Only:
10-15EGD and 9-15EGZD

Mobile:  20EORD only

India

Retail:  8.5, 12 RESL (RESM) only

Residential:  17/18RES only

Residential:  17/18RESL (RESM) only

Part No.

GM28707

GM47982^{Note 3}

GM47982

GM42037

GM60207

GM39579

GM52275 (Display)
GM49103 (Circuit Board)

GM52276 (Display)
GM49104 (Circuit Board)

Service Part No.

GM34969

GM48031

GM48031

GM46826

na

GM48127

GM54781 (Circuit Board)

GM54782 (Circuit Board)

Application Program Software^{Note 1}

V3.10 or later

V3.00 or later

V3.10 or later

V3.10 or later

1.04 or later

V3.11 or later

V1.00 or later

V1.00 or later

Software Identification

(1) Hold SEL button and move master switch to RUN
(2) Application program version displayed within 7 seconds

Displayed during crank cycle

Displayed during crank cycle

Displayed during crank cycle

Conditions of Use

Reference Service Bulletin SB-652

--

--

--

--

Notes: 

1) Three software versions (V1.x, V2.x, and V3.x) were used with the Advanced Digital Control and other products listed in this chart.  Software Version 3.10 or later is now used on all Advanced Digital Control products.

2) ADC requires customer to order hardware part no. appropriate to generator to assure ADC application program is properly applied.

3) ADC part no. GM46776 was original release for Marine 5/7.3ECD and 4/6EFCD.  Following availability of "Low CO" application, ADC part no. changed to GM47982.  Units with part no. GM46776 can be updated by ordering service part GM48030 which will add the "Low CO" hardware.