KPC 1000 GENERATOR CONTROLLER

Markets: Kohler Rental (60-400 KRP) and 10, 15, 20kW REODB/REOZDB Industrial

The KPC 1000 firmware (application program) can be field modified using KPC 1000 PC Interface software.

Refer to TP-6471 and TP-6427 for more information.

Order KPC 1000 service part nos.:
GM62631 (10, 15, 20REOD(Z)B)
GM49133 (60 KRP)
GM49134 (200 KRP)
GM49135 (400 KRP)

Order KPC 1000 PC Interface Software Kit (to upgrade, monitor, and make adjustments to control) using part no. GM50591-KP1.
Includes required connection harness between control and PC.

Click here to download separate software programs for service functions:
PC Interface Software
PC Calibration Software
PC Utility (Hourmeter) Software

Click here to download firmware

Notice: Do not load an earlier version over a later version of the firmware.

Version 1.46
Fuel in Basin Alarm: Now triggering when genset is in either the OFF, AUTO, or RUN mode.

Version 1.38
10, 15, 20kW REODB/REOZDB Support Added

Version 1.20
Kohler Rental Power Upgrades