RSA III

The RSA III allows monitoring of the generator set and up to four ATS. It is a replacement for RSA II.

The RSA III monitors generator sets and ATS with the following controllers:
KPC1000, Decision-Maker 3+, 550, 3000, 3500, 6000
Decision-Maker MPAC 750, 1200, 1500
MPAC 1000, 1500

Use Kohler SiteTech software to view events and adjust settings.

Refer to Specification Sheet G6-139 for more information.

Order part numbers: GM91356-KP1 - RSA III Annuniator Only
GM91356-KP2 - RSA III w/ATS
GM91356-KP3 - RSA III w/Multiple ATS

Click here to download RSA III firmware and SiteTech Software

RSA III Firmware:

Version 2.00.8 3/3/2017
Update:
1. Added support for the DEC 8000 and APM802 controllers.

Version 1.02.0
Update:
1. Resolved issue where the timeout factor was not being used for Modbus write response (used for ATS test), which would result in a false communication error.
2. Resolved issue where the slave devices status indicators were not getting cleared out on a loss of communication, due to the slave device responding to some of the request but not all the request(s).

Version 1.01.2
Update: Resolved communication issue.