MONITOR III

This software program is used to monitor and allow setting adjustments on both generator and transfer switch controllers. These include:
DEC 3000
DEC 6000
DEC 550
DEC 340*
DEC 3+
MPAC 1500
MPAC 1000
M340/M340+*
PM 340 Power Monitor*

*Requires hardware: Converter, Modbus/KBUS (GM41143-KP3)

The software runs on a personal computer to provide access at the installation site, via a modem connection, or via an Ethernet connection.

Monitor III may require the following controller application code version to perform effectively:
550 Application Program Version 2.42 or later
3+ Application Program Version 1.17 or later
MPAC 1500 Version 1.00 or later
MPAC 1000 Version 1.27 or later


Also check "Field Updates" for field issues regarding this product.

Refer to G6-76 and TP-6347 for additional product information.

Order Monitor III Kit Part Number as required:
GM41141-KP1 Software, USB Key, 10 ft. RS-232 cable
GM41141-KP2 Software, USB Key, 10 ft. RS 232 cable, modem, RS-232/RS-485 converter, and other hardware to complete network.